Home
>
products
>
Screw Air Compressor
>
|
| Place of Origin | Germany |
| Brand Name | Shanghai Rotorcomp |
| Certification | ISO.TUV,CE,GS |
| Model Number | LGCD screw compressor |
1. Coupling driving system
2. Highly competitive price
3. Economic running costs
4. ISO, GA, SGS certificates
First, the curved face of the rotors engaged fully, thus contributing to the formation of a hydrodynamic lubrication film, reducing the contact zone of the lateral leakage, improve compressor efficiency; as well as to improve the processing, test performance of the rotor.
Second, using the design ideas of bigger rotor, bigger bearing, low-speed ", speed lower than other brands up to 30 ~ 50%, this could reduce noise and vibration, reducing the compressed air temperature and improve the rigidity of rotor and prolong its life, reduce sensitivity to the impurity and the oil carbide.
Third, fully meet or exceed the national standard ISO9001 air compressors energy efficiency limit !
The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading
manufacturers. rives and electrics.
The centrepiece of Direct-driven Screw compressor is the air end, which is constructed and manufactured with the most modern production methods in China. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
Only electric motors from well-known manufacturers of protection class IP54/IP23 are used in our Direct-driven Screw compressor. As a standard, the drive motors are monitored both thermally (via the thermistor of the motor) as well as electronically(overload protection via the frequency inverter).
LGCD Direct-driven Screw compressor up to 132 kW are equipped with external separators that can be changed in a simple spin-off/spin-on process. Larger units have an internal separator cartridge. Due to the excellent separation efficiency of the system as a whole, the compressors can be used in the pressure range of 5.0 to 15.0 bar. Special pressures on request.
The frequency converter minimises idle times and optimises supply with fluctuating compressed air requirements. Start-up peaks are avoided and the compressor’s delivery rate is controlled continuously – that saves electricity costs! The total costs for your compressed air supply are significantly reduced and investment costs are amortised in the shortest possible time.
| No. | Model | Capacity | Working pressure | Motor Power | Noise Level | Driven type | Compressed air outlet temperature | oil content | Compressed air connection | Dimension | Weight(kg) |
| (m3/min) | (Mpa) | (kw) | dB(A) | ||||||||
| 1 | LGCD-1.20/7 | 1.2 | 0.7 | 7.5 | 70±3 | V belt | Ambient temperature +10℃ | 1~2ppm | G3/4 | 800*700*930 | 320 |
| LGCD-1.15/8 | 1.15 | 0.8 | |||||||||
| LGCD-1.0/10 | 1 | 1 | |||||||||
| LGCD-0.75/13 | 0.75 | 1.3 | |||||||||
| LGCD-0.60/15 | 0.6 | 1.5 | |||||||||
| 2 | LGCD-1.70/7 | 1.7 | 0.7 | 11 | 70±3 | V belt | Ambient temperature +10℃ | 1~2ppm | G3/4 | 1080*750*1000 | 340 |
| LGCD-1.65/8 | 1.65 | 0.8 | |||||||||
| LGCD-1.50/10 | 1.5 | 1 | |||||||||
| LGCD-1.15/13 | 1.15 | 1.3 | |||||||||
| LGCD-0.90/15 | 0.9 | 1.5 | |||||||||
| 3 | LGCD-2.35/7 | 2.35 | 0.7 | 15 | 70±3 | V belt | Ambient temperature +10℃ | 1~2ppm | G1 | 1080*750*1000 | 360 |
| LGCD-2.30/8 | 2.3 | 0.8 | |||||||||
| LGCD-2.05/10 | 2.05 | 1 | |||||||||
| LGCD-1.65/13 | 1.65 | 1.3 | |||||||||
| LGCD-1.20/15 | 1.2 | 1.5 | |||||||||
| 4 | LGCD-3.10/7 | 3.1 | 0.7 | 18.5 | 72±3 | V belt/Direct | Ambient temperature +10℃ | 1~2ppm | G1 | 1308*850*1160 | 450 |
| LGCD-3.00/8 | 3 | 0.8 | |||||||||
| LGCD-2.60/10 | 2.6 | 1 | |||||||||
| LGCD-2.10/13 | 2.1 | 1.3 | |||||||||
| LGCD-1.80/15 | 1.8 | 1.5 | |||||||||
| 5 | LGCD-3.65/7 | 3.65 | 0.7 | 22 | 72±3 | V belt/Direct | Ambient temperature +10℃ | 1~2ppm | G1 | 1310*850*1160 | 470 |
| LGCD-3.60/8 | 3.6 | 0.8 | |||||||||
| LGCD-3.20/10 | 3.2 | 1 | |||||||||
| LGCD-2.75/13 | 2.75 | 1.3 | |||||||||
| LGED-2.40/15 | 2.4 | 1.5 | |||||||||
| 6 | LGED-5.20/7 | 5.2 | 0.7 | 30 | 72±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | G1-1/2 | 1500*1000*1320 | 780 |
| LGCD-5.00/8 | 5 | 0.8 | |||||||||
| LGCD-4.50/10 | 4.5 | 1 | |||||||||
| LGCD-3.70/13 | 3.7 | 1.3 | |||||||||
| LGCD-3.00/15 | 3 | 1.5 | |||||||||
| 7 | LGCD-6.70/7 | 6.7 | 0.7 | 37 | 72±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | G1-1/2 | 1500*1000*1320 | 830 |
| LGCD-6.60/8 | 6.6 | 0.8 | |||||||||
| LGCD-5.80/10 | 5.8 | 1 | |||||||||
| LGCD-4.70/13 | 4.8 | 1.3 | |||||||||
| LGCD-4.10/15 | 4.1 | 1.5 | |||||||||
| 8 | LGCD-7.30/7 | 7.7 | 0.7 | 45 | 72±3 | V belt/Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | G1-1/2 | 1500*1000*1320 | 900 |
| LGCD-7.00/8 | 7.6 | 0.8 | |||||||||
| LGCD-6.50/10 | 7 | 1 | |||||||||
| LGCD-5.50/13 | 5.8 | 1.3 | |||||||||
| LGCD-4.70/15 | 4.7 | 1.5 | |||||||||
| 9 | LGED-10.80/7 | 10.8 | 0.7 | 55 | 76±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | G2 | 1750*1200*1500 | 1180 |
| LGCD-10.00/8 | 10 | 0.8 | |||||||||
| LGCD-9.00/10 | 9 | 1 | |||||||||
| LGCD-7.80/13 | 7.8 | 1.3 | |||||||||
| LGCD-6.50/15 | 6.5 | 1.5 | |||||||||
| 10 | LGCD-13.60/7 | 13.6 | 0.7 | 75 | 76±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | G2 | 1750*1200*1500 | 1340 |
| LGCD-13.00/8 | 13 | 0.8 | |||||||||
| LGCD-11.50/10 | 11.5 | 1 | |||||||||
| LGCD-9.80/13 | 9.8 | 1.3 | |||||||||
| LGCD-7.60/15 | 7.6 | 1.5 | |||||||||
| 11 | LGCD-17.00/7 | 17 | 0.7 | 90 | 76±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | DN80 | 1750*1200*1500 | 1850 |
| LGCD-15.30/8 | 15.3 | 0.8 | |||||||||
| LGCD-14.00/10 | 14 | 1 | |||||||||
| LGCD-12.00/13 | 12 | 1.3 | |||||||||
| LGCD-10.50/15 | 10.5 | 1.5 | |||||||||
| 12 | LGCD-21.50/7 | 21.5 | 0.7 | 110 | 79±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | DN80 | 2350*1500*1760 | 2200 |
| LGCD-20.50/8 | 20.5 | 0.8 | |||||||||
| LGCD-17.50/10 | 17.5 | 1 | |||||||||
| LGCD-14.50/13 | 14.5 | 1.3 | |||||||||
| LGCD-12.00/15 | 12 | 1.5 | |||||||||
| 13 | LGCD-24.50/7 | 24.5 | 0.7 | 132 | 79±3 | V belt/Direct | Ambient temperature +10℃ /Cooling water temperature +10℃ | 1~2ppm | DN80 | 2350*1500*1760 | 2260 |
| LGCD-23.50/8 | 23.5 | 0.8 | |||||||||
| LGCD-21.00/10 | 21 | 1 | |||||||||
| LGCD-17.50/13 | 17.5 | 1.3 | |||||||||
| LGCD-14.50/15 | 14.5 | 1.5 | |||||||||
| 14 | LGCD-29.20/7 | 29.2 | 0.7 | 160 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN80 | 2650*1650*1800 | 3300 |
| LGCD-28.00/8 | 28 | 0.8 | |||||||||
| LGCD-26.00/10 | 26 | 1 | |||||||||
| LGCD-22.00/13 | 22 | 1.3 | |||||||||
| 15 | LGCD-357.50/7 | 37.5 | 0.7 | 200 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN100 | 2650*1650*1800 | 3860 |
| LGCD-36.00/8 | 36 | 0.8 | |||||||||
| LGCD-33.00/10 | 33 | 1 | |||||||||
| LGCD-25.00/13 | 25 | 1.3 | |||||||||
| 16 | LGCD-46.50/7 | 46.5 | 0.7 | 250 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN100 | 3000*1950*1850 | 5700 |
| LGCD-45.00/8 | 45 | 0.8 | |||||||||
| LGCD-40.00/10 | 40 | 1 | |||||||||
| LGCD-36.00/13 | 36 | 1.3 | |||||||||
| 17 | LGCD-52.00/7 | 52 | 0.7 | 280 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN100 | 3000*1950*1850 | 5900 |
| LGCD-49.20/8 | 49.2 | 0.8 | |||||||||
| LGCD-45.00/10 | 45 | 1 | |||||||||
| LGCD-41.30/13 | 41.3 | 1.3 | |||||||||
| 18 | LGCD-60.60/7 | 60.6 | 0.7 | 315 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN100 | 3000*1950*1850 | 6800 |
| LGCD-56.50/8 | 56.5 | 0.8 | |||||||||
| LGCD-50.50/10 | 50.5 | 1 | |||||||||
| LGCD-45.00/13 | 45 | 1.3 | |||||||||
| 19 | LGCD-71.50/7 | 71.5 | 0.7 | 355 | 79±3 | Direct | Ambient temperature +10℃/Cooling water temperature +10℃ | 1~2ppm | DN125 | 5000*2050*2200 | 8500 |
| LGCD-64.60/8 | 64.6 | 0.8 | |||||||||
| LGCD-55.50/10 | 55.5 | 1 | |||||||||
| LGCD-46.50/13 | 46.5 | 1.3 | |||||||||
| 20 | LGCD-600W | 86 | 0.8 | 450 | 79±3 | Direct | Cooling water temperature +10℃ | 1~2ppm | DN150 | 4500*2500*2200 | 12500 |
| LGCD-600W | 73.5 | 1 | |||||||||
| 21 | LGCD-670W | 95 | 0.8 | 500 | 79±3 | Direct | Cooling water temperature +10℃ | 1~2ppm | DN150 | 4500*2500*2200 | 12900 |
| LGCD-670W | 82 | 1 | |||||||||
| 22 | LGCD-750W | 104 | 0.8 | 560 | 79±3 | Direct | Cooling water temperature +10℃ | 1~2ppm | DN150 | 4500*2500*2200 | 13500 |
| LGCD-750W | 90.5 | 1 | |||||||||
| Note: |
| 1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail; |
| 2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail; |
|
3. Frequencyinverters (optional). 4. 1 year warranty, 2 years warranty for air end |
Best Price Rotary Screw Air Compressor for Sale
INDUSTRIAL APPLICATION
Contact Us at Any Time
