-
Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
-
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
50HP screw compressor original german air end in CE certificates, 5 years warranty
Place of Origin | Germany |
---|---|
Brand Name | Shanghai Rotorcomp |
Certification | ISO.TUV,CE,GS |
Model Number | LGFD screw compressor |
Minimum Order Quantity | Min.:1set |
Price | Negotiable |
Packaging Details | Exported Wooden Package |
Delivery Time | 15-20 working days |
Payment Terms | Western Union, T/T, L/C, D/P, D/A |
Supply Ability | 3,000 sets/per month |
Warranty | 5 Years | Air End | Made In Germany |
---|---|---|---|
Advanced Design | Design In Germany | Motor | IP55 Super High Efficient Motor |
Cooling System | Increased 30% Cooling Performance | Rated Power | 37Kw/50Hp |
Working Pressure | 7-15Bar | Cooling Air Flow | BDE Italy |
Weight | 1380Kg | Dimension | 1500*1000*1320mm |
High Light | industrial screw compressor,rotary screw type compressor |
50HP air screw rotary compressor german air end in CE certificates, 5 years warranty
Advantages of our new air screw compressor technology
Advantages of our new EVO-technology
New ROLLING PROFILE- ultimate efficiency with
reduced noise
Long life cycle due to increased bearing dimensions
and wear-free ROLLING PROFILE
Wide operating pressure range from 5 to 15 barg
High quality manufacturing and assembling
Made in Germany
Quality assurance ?bench test of every air end
before leaving our factory
Easy application selection with our new
ROTORCOMP SIZING AIR software
Highest flexibility for your package design
Suitable for all types of drive driving motors
Drive options: Belt drive, direct drive, internal gear drive
Base and face-flange mounting
Ultimate efficiency and reduced noise through
High volumetric output due to
• Reduced internal leakage
• Thermally optimized oil injection system
• Improved suction port efficiency giving reduced
internal losses
Low power consumption due to
• Optimized torque characteristics and reduced
internal friction
• Improved outlet port with lower pressure losses
Reduced noise and low vibration due to
• Smooth rolling of the rotors with new
ROLLING PROFILE®
• Optimized outlet port
All of our LGFD air screw compressors have special Drives and electrics system that is almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor.
The working process of the twin-screw compressor: the motor drives the main rotor through the coupling, the speed increasing gear or the belt. Since the two rotors mesh with each other, the main rotor directly drives the auxiliary rotor to rotate together.
Under the relative negative pressure, the air is sucked in. Under the action of the tooth peak and the tooth groove, the gas is transported and compressed, and when the rotor meshing surface is turned into communication with the exhaust port of the casing, the compressed gas begins to be discharged.
37KW air cooling compressor parameters
ITEM | UNIT | MODEL | ||||
LGFD-37 | ||||||
Free air delivery | m3/min | 6.40 | 5.80 | 4.80 | 4.30 | |
Max. working pressure | MPa | 0.8 | 1.0 | 1.3 | 1.5 | |
Compressor type | Oil inject screw compressor | |||||
Cooling type | Air cooling | |||||
Driven type | Belt driven | |||||
Inlet status | Temperature | ℃ | ≤55 | |||
Pressure | MPa | Atmospheric pressure | ||||
Relative humidity | ≤90% | |||||
Noise Level | dB(A) | ≤72 | ||||
Residual oil content | ppm | ≤1 | ||||
Drive rotor speed | rpm | 4550 | 4050 | 3550 | 3250 | |
Compressed air outlet temperature | ℃ | Ambient temperature+10 | ||||
Cooling air flow | m3/hr | 9200 | ||||
Control mode | Intelligent controller | |||||
Safety valve set pressure | MPa | 0.88 | 1.10 | 1.43 | 1.60 | |
Lubricating oil volume | L | 30 | ||||
Lubricating oil brand | ROTORCOMP | |||||
Compressed air outlet connection | G1-1/4 | |||||
Dimension | L | mm | 1500 | |||
W | mm | 1000 | ||||
H | mm | 1320 | ||||
Net Weight | kg | 1180 | ||||
Motor | Model | Y2200L1-2 | ||||
Speed | rpm | 2950 | ||||
Rated Power | KW | 37 | ||||
Service factor | 1.2 | |||||
Protection type | IP55 | |||||
Insulation class | F | |||||
Startup mode | ʏ-Δ starting | |||||
Voltage | V | 380(Special on request) | ||||
Frequency | Hz | 50(Special on request) | ||||
Rated current | A | 69.8 | ||||
Weight of motor | kg | 250 |
Note: |
1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail; |
2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail; |
3. Frequency converters (optional). |