Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
Refrigerated Type Air Dryer Machine , Manual Small Air Dryer For Compressor
|Cooling Mode||Air&Water Cooling||Refrigerant||R410a,R402c,R22|
|Dew Point||2-8℃||Cooling Sytem||Enlarged Heat Exchange, 10-15% Better Performance|
|Min.Ambient Temp.||5 °C|
air dryer machine,
refrigerated compressed air dryer
Super Cooled 50HP Compressor Refrigerated Air Dryer For 50HP compressor
Features of High-temp Refrigerated Air Dryer:
Working Pressure: ≤13bar
Max.inlet temp: 82°C Max Ambient Temp:50°C
Min.Ambient Temp: 5°C Refrigerant: R22, R407C,R134A,R410A
Cooling type: Air-cooled&Water-cooled Dew Point: 2°C ~8°C
Why compressed air purification?
Compressor alone is not enough.In most cases,untreated compressed air is naturally dirty,oily and wet.This condition is certainly notdesirable for industrial applications and could directly or indirectlylead to the following situations.
• Reduction in efficiency of expensive pneumatic tools & machineries
• Frequent costly maintenance of pneumatic tools & machineries
• Lost of production hours with increased machines down time
• High rejection rate of products
• Inability to meet delivery deadlines
• Unsatisfied customers
Hence compressed air needs to be purified or treated before they can be efficiently utilised.With theincreasing popularity of compressed air as an alternative source of utility for today’s modern production facilities,it is essential that you select the most suitable compressed air treatment systems for your plant and budget this relatively small investment into your operations to avoid daily problems with untreated compressed air which could eventually lead to expensive additional operating expensesand loss businesses.
|1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail;|
|2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail;|
|3. 1 year warranty, 2 years warranty for refrigerated compressor|