• Mr.Kerry Robinson from Australia
    today I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
  • Pedro Antonio from USA
    We've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
WhatsApp : +008618049981656

120HP air screw compressor original german air end in CE certificates, 5 years warranty

Place of Origin Germany
Brand Name Shanghai Rotorcomp
Certification ISO.TUV,CE,GS
Model Number LGFD screw compressor
Minimum Order Quantity Min.:1set
Price Negotiable
Packaging Details Exported Wooden Package
Delivery Time 15-20 working days
Payment Terms Western Union, T/T, L/C, D/P, D/A
Supply Ability 3,000 sets/per month
Product Details
Warranty 5 Years Air End Made In Germany
Advanced Design Design In Germany Motor MEPS Super High Efficient Motor
Cooling System Increased 30% Cooling Performance Intake Valve Hoerbiger
Safety Valve Yuantian Air Filter German MANN
Controller Colorful Touchable Smart Controller
High Light

rotary screw type compressor

,

screw drive air compressor

Leave a Message
Product Description

120HP air screw compressor original german air end in CE certificates, 5 years warranty

 

Advantages of our new  air screw compressor technology

 
 
Our new EVO® oil-injected screw air ends are among the most efficient air ends in the world
market today.
All of our 30+ years experience in the supply of our well-known B air ends and
NK compact units is built into our new EVO® generation ensuring a highly reliable product.
Using EVO® as the heart, our OEM partners can build compressor systems with ultimate
efficiency, low noise, at the highest quality standards.
 
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 0
 
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 1
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 2
 
 
All of our LGFD air screw compressors have special Drives and electrics system that is almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor.
 
All the electronic components are brand products of leading manufacturers. rives and electrics. The Air end of our LGFD rotary screw compressor-made in Germany. The centrepiece of the compressor is the air end, which is constructed and manufactured with the most modern production methods in Germany. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
We design the new Oil separation system for our LGFD air screw compressor that Compressors up to 132 kW are equipped with external separators that can be changed in a simple spin-off/spin-on process. Larger units have an internal separator cartridge. Due to the excellent separation efficiency of the system as a whole, the compressors can be used in the pressure range of 5.0 to 15.0 bar. Special pressures on request.
And the Oil circuit of our LGFD rotary screw compressor is the amount of oil in the units is determined in such a way as to extend the oil change intervals (depending on ambient conditions).An oil level sensor is integrated as standard and is read by the controller. All the units in this series have a horizontal oil separation vessel in which the oil is separated from the compressed air highly efficiently at low speeds.
 
90KW air cooling compressor parameters
 

ITEMUNITMODEL
LGFD-90
Free air deliverym3/min16.5014.3012.011.0
Max. working pressureMPa0.81.01.31.5
Compressor type Oil inject screw compressor
Cooling type Air cooling
Driven type Belt driven
Inlet statusTemperature≤55
PressureMPaAtmospheric pressure
Relative humidity ≤90%
Noise LeveldB(A)≤79
Residual oil contentppm≤1
Drive rotor speedrpm2750230020501750
Compressed air outlet temperatureAmbient temperature+10
Cooling air flowm3/hr12200
Control mode Intelligent controller
Safety valve set pressureMPa0.881.101.431.60
Lubricating oil volumeL70
Lubricating oil brand ROTORCOMP
Compressed air outlet connection G2
DimensionLmm1750
Wmm1200
Hmm1500
Net Weightkg1850
MotorModel Y2280-2
Speedrpm2970
Rated PowerKW90
Service factor 1.2
Protection type IP55
Insulation class F
Startup mode ʏ-Δ starting
VoltageV380(Special on request)
FrequencyHz50(Special on request)
Rated currentA166
Weight of motorkg566
Note:
1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail;
2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail;

3. Frequency converters (optional).
4. 1 years warranty, 5 years warranty for air end

 
 
 
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 3
 
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 4
120HP  air screw compressor original german air end  in CE certificates, 5 years warranty 5