Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
80mm To 115mm Rock Drilling Rig Lengthened Guide Rail High Performance
|Place of Origin||GERMAN|
|Brand Name||Shanghai Rotorcomp|
|Minimum Order Quantity||negotiate|
|Packaging Details||Plywood case for export package|
|Delivery Time||5-15 Working days|
|Payment Terms||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Product Name||Hard Rock Drilling Equipment||Rock Hardness||F=6-20|
|Hole Diameter||80-115 Mm||Economical Drill Depth||30 M|
|Pressure||0.7-1.7 MPa||Compensation Length||900 Mm|
|Rotating Speed||0-140 Rpm||Rotation Torque||1200 N.m|
crawler drilling rig,
borehole drilling rig
Based on our previous product KG925 borehole drilling machine, we developed this KGH4 medium pressure eco-friendly crawler drilling rig. The new product comes with a dry type dust collector, and the drill bit diameter ranges from 80mm to 115mm. This crawler drill rig can drill blastholes (such as pre-splitting blasting hole) and anchor cable holes in horizontal, vertical and inclined directions. The attractive features of this blasthole driller like stable performance, wide application, high cost-effectiveness, makes our KGH4 medium pressure eco-friendly crawler drilling rig an ideal choice for medium and small mines.
1. The imported high-speed motor is used for the dust collecting system. The system is stable and efficient.
2. The guide rail is lengthened, and the first drill rod of the crawler drilling rig is 3m long.
3. Special treatment has been conducted on the walking system, making the system strong and durable.
4. The ultra-high rotating speed can reach 140r/min, making the drilling speed greatly accelerated.
|Rock hardness||F = 6-20|
|Drill bit diameter||φ80-115 mm|
|Drill depth||30 m|
|Walking speed||0~2.5 Km/h|
|Min. ground clearance||290 mm|
|Engine||YC4D80 (58kW, 2400rpm)|
|Overall dimension||5600×2700×2500 mm|
|Overall weight||5000 Kg|
|Working air pressure||0.7-1.7 MPa|
|Carriage length||3600 mm|
|Carriage dip angle||Down 135°, up 50°, total 185°|
|Max. carriage swing angle||Left 100°, right 45°, total 145°|
|Max. drill arm lateral swing angle||Left 45°, right 45°, total 90°|
|Compensation length||900 mm|
|Rotating speed||0-140 rpm|
|Rotation torque||1200 N.m|
|Lifting force||25 KN|
|Drill rod diameter||φ64 mm, φ76 mm (standard configuration)|
|Drill rod length||3000 mm|
Recommend parts for the KGH4 crawler drilling rig
1. Drill bit: Φ90, Drill hammer: QCW930, Drill rod: Φ64mm
2. Drill bit: Φ105, Drill hammer: HD45S, Drill rod: Φ64mm
3. Drill bit: Φ115, Drill hammer: HD45A, Drill rod: Φ76mm