Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
Air Compressor Type Rock Drilling Rig For Various Working Environments
|Place of Origin||GERMAN|
|Brand Name||Shanghai Rotorcomp|
|Minimum Order Quantity||negotiate|
|Packaging Details||Plywood case for export package|
|Delivery Time||5-15 Working days|
|Payment Terms||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Product Name||Rock Drilling Rig||Rock Hardness||F=6-20|
|Hole Diameter||105-140mm||Economical Drill Depth||25m|
|Rotating Speed||0-63r/min||Lifting Capacity||20000N|
crawler drilling rig,
borehole drilling rig
Our KY140A high pressure crawler drilling rig is well designed for various working environments. Its working performance has been recognized by many customers.
1. Safe and stable walking mechanism
This kind of rock drilling machine has low barycenter and large ground clearance, so it can walk on bumpy round easily. The gradeability is strong and the fault rate is quite low, making the high pressure crawler drilling rig suitable for bad working environment. No additional air compressor is needed for walking.
2. Powerful driving system
A famous brand four-cylinder is adopted, and its driving power is super high. A patented air in-flow adjuster is applied to the diesel engine. The prefilter, fuel filter, and filtering paper make an excellent combination, which has greatly enhanced the environmental adaptability of this crawler drill and the service life of the engine.
3. Powerful driving and rotating mechanisms
The driving mechanism our this powerful drilling machine consists of a hydraulic oil cylinder and fall block. The lifting force of our high pressure crawler drilling rig can reach 20KN. By adjusting the pressure adjusting valve on the driving regulating valve, you can achieve a proper driving force.
|Model||KY140A High pressure crawler drilling rig|
|Rock hardness||F = 6-20|
|Economical drilling depth||25m|
|Drill rod specification||Φ76×3000mm/Φ89×3000mm|
|Drill arm rising angles||Down 15°, Up 50°, Total 65°|
|Drill arm swing angle||Left 45°, Right 45°, Total 90°|
|Carriage swing angle||Left 50°, Right 50°, Total 100°|
|Carriage pitch angle||180°|
|Overall dimension (L×W×H)||5850×2250×2020(mm)|
|Note||Pneumatic-hydraulic driving mechanism|
Recommended spare parts for KY140A
|Drill bit diameter||115mm|
|Drill rod (Diameter×L)||Φ 76×3000mm|