• Mr.Kerry Robinson from Australia
    today I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
  • Pedro Antonio from USA
    We've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
WhatsApp : +008618049981656

Air Cooled Small Rotary Air Compressor Oil Inject Horizontal Air Compressor

Place of Origin Germany
Brand Name Shanghai Rotorcomp
Certification ISO.TUV,CE,GS
Model Number LGCD screw compressor
Minimum Order Quantity Min.:1set
Price Negotiable
Packaging Details Exported Wooden Package
Delivery Time 15-20 working days
Payment Terms Western Union, T/T, L/C, D/P, D/A
Supply Ability 3,000 sets/per month
Product Details
Warranty 2 Years Air Rotors Made In Germany
Advanced Design Design In Germany Cooling System More Than 20-25% Cooling Performance
Rated Power 45Kw/6-Hp Driving System Coupling
Cooling Air Flow 9800m3/hr Service Facto 1.2
Dimension 1500*1000*1320mm Weight 860Kg
Working Pressure 7-13Bar
High Light

industrial screw compressor

,

screw drive air compressor

Leave a Message
Product Description

Cheaper price Air Cooled Screw Air Compressor 45Kw 60Hp TUV,CE,ISO certificates!

 

Advantages of Air Cooled Screw Air Compressor:

 

The curved face of the rotors engaged fully, thus contributing to the formation of a hydrodynamic lubrication film, reducing the contact zone of the lateral leakage, improve compressor efficiency; as well as to improve the processing, test performance of the rotor.
 

 

 

 Oil separation system

LGCD Direct-driven Screw compressor up to 132 kW are equipped with external separators that can be changed in a simple spin-off/spin-on process. Larger units have an internal separator cartridge. Due to the excellent separation efficiency of the system as a whole, the compressors can be used in the pressure range of 5.0 to 15.0 bar. Special pressures on request.

 

Air Cooled Small Rotary Air Compressor Oil Inject Horizontal Air Compressor 0

 

 

Frequency inverters (optional)

The frequency converter minimises idle times and optimises supply with fluctuating compressed air requirements. Start-up peaks are avoided and the compressor’s delivery rate is controlled continuously – that saves electricity costs! The total costs for your compressed air supply are significantly reduced and investment costs are amortised in the shortest possible time.

 

Air Cooled Small Rotary Air Compressor Oil Inject Horizontal Air Compressor 1

 

 

45KW air cooling compressor parameters

 

ITEM UNIT MODEL
LGCD-45
Free air delivery m3/min 7.70 7.60 7.00 5.80
Max. working pressure MPa 0.7 0.8 1.0 1.3
Compressor type   Oil inject screw compressor
Cooling type   Air cooling
Driven type   Direct driven
Inlet status Temperature ≤45
Pressure MPa Atmospheric pressure
Relative humidity   ≤90%
Noise Level dB(A) ≤72
Residual oil content ppm ≤2
Drive rotor speed rpm 2970 2970 2970 2970
Compressed air outlet temperature Ambient temperature+10
Cooling air flow m3/hr 9800
Control mode   Intelligent controller
Safety valve set pressure MPa 0.77 0.88 1.10 1.43
Lubricating oil volume L 30
Lubricating oil brand   ROTORCOMP
Compressed air outlet connection   G1-1/2
Dimension L mm 1500
W mm 1000
H mm 1320
Net Weight kg 860
Motor Model   Y2200L1-2
Speed rpm 2950
Rated Power KW 45
Service factor   1.2
Protection type   IP23/IP55
Insulation class   F
Startup mode   ʏ-Δ starting
Voltage V 380(Special on request)
Frequency Hz 50(Special on request)
Rated current A 84
Weight of motor kg 312
 
Air Cooled Small Rotary Air Compressor Oil Inject Horizontal Air Compressor 2
Air Cooled Small Rotary Air Compressor Oil Inject Horizontal Air Compressor 3