Payment & Shipping Terms:
|Warranty:||2 Years||Air Rotors:||Made In Germany|
|Advanced Design:||Design In Germany||Cooling System:||Better 20-25% Performance|
|Rated Power:||30Kw/40Hp||Driving System:||Direct Driven|
|Weight:||780Kg||Lubricating Oil Volume:||30L|
industrial screw compressor,
screw drive air compressor
1. Coupling driving system
2. Highly competitive price
3. Economic running costs
4. ISO, GA, SGS certificates
Coupling Driven Air Screw Compressor features:
Using the design ideas of bigger rotor, bigger bearing, low-speed ", speed lower than other brands up to 30 ~ 50%, this could reduce noise and vibration, reducing the compressed air temperature and improve the rigidity of rotor and prolong its life, reduce sensitivity to the impurity and the oil carbide.
Fully meet or exceed the national standard ISO 19153-2003 air compressors energy efficiency limit!
The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading
manufacturers. rives and electrics.
The centrepiece of Direct-driven Screw compressor is the air end, which is constructed and manufactured with the most modern production methods in China. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
Only electric motors from well-known manufacturers of protection class IP54/IP23 are used in our Direct-driven Screw compressor. As a standard, the drive motors are monitored both thermally (via the thermistor of the motor) as well as electronically(overload protection via the frequency inverter).
30KW/40HP air cooling compressor parameters
|Free air delivery||m3/min||5.20||5.00||4.50||3.70|
|Max. working pressure||MPa||0.7||0.8||1.0||1.3|
|Compressor type||Oil inject screw compressor|
|Cooling type||Air cooling|
|Driven type||Direct driven|
|Residual oil content||ppm||≤2|
|Drive rotor speed||rpm||2950||2950||2950||2950|
|Compressed air outlet temperature||℃||Ambient temperature＋10|
|Cooling air flow||m3/hr||9200|
|Control mode||Intelligent controller|
|Safety valve set pressure||MPa||0.77||0.88||1.10||1.43|
|Lubricating oil volume||L||30|
|Lubricating oil brand||ROTORCOMP|
|Compressed air outlet connection||G1-1/2|
|Startup mode||ʏ-Δ starting|
|Voltage||V||380(Special on request)|
|Frequency||Hz||50(Special on request)|
|Weight of motor||kg||232|
Contact Person: zhou