Payment & Shipping Terms:
|Cooling Mode:||Air&Water Cooling||Refrigerant:||R410a,R402c,R22|
|Dew Point:||2-8℃||Cooling Sytem:||Enlarged Heat Exchange, 10-15% Better Performance|
|Min.Ambient Temp.:||5 °C|
air dryer machine,
refrigerated compressed air dryer
Working Pressure: ≤13bar
Max.inlet temp: 82°C Max Ambient Temp:50°C
Min.Ambient Temp: 5°C Refrigerant: R22, R407C,R134A,R410A
Cooling type: Air-cooled&Water-cooled Dew Point: 2°C ~8°C
1. Shanghai rotorcomp compressor dryer Using filtered liquid separator American HANKISON filter, Japanese Panasonic & Korean LG Refrigeration compressor to keep durability and stability. Gas-liquid separation effect completely to avoid secondary evaporation of moisture, cold and dry to ensure that the important role of the drying effect, it is more efficient than the cyclone separation, separation efficiency 99.99%.
2. Galvanized copper piping systems using internal working pressure 0.3-4.5MPa arbitrary choice.
3. Made of stainless steel tubing for pharmaceutical, food industry, acid and alkali corrosion.
Is the dehumidification of the dryer must be caused by insufficient dew point?
Compressed air dryness refers to the amount of water vapor mixed in dry compressed air. When the water vapor content is low, the air is dry, and vice versa.
Compressed air dryness is measured by the "pressure dew point", the "pressure dew point" is low, and the compressed air is dry. Sometimes a small amount of liquid water is mixed in the compressed air discharged from the dryer, but this is not necessarily caused by insufficient dew point of the compressed air.
The presence of liquid water droplets in the exhaust gas may be caused by water accumulation in the machine, poor drainage or incomplete separation, especially the damage caused by the blockage of the automatic drainer. The venting water of the dryer is less than the dew point, which can bring worse adverse effects to the downstream gas equipment. The cause should be eliminated.
|1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail;|
|2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail;|
|3. 1 year warranty, 2 years warranty for refrigerated compressor|
Contact Person: zhou