• Mr.Kerry Robinson from Australia
    today I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
  • Pedro Antonio from USA
    We've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
WhatsApp : +008618049981656

Large Oil Flooded Rotary Screw Compressor / Mobile Screw Compressor

Place of Origin Germany
Brand Name Shanghai Rotorcomp
Certification ISO.TUV,CE,GS
Model Number LGFD VSD screw compressor
Minimum Order Quantity Min.:1set
Price Negotiable
Packaging Details Exported Wooden Package
Delivery Time 12-15 working days
Payment Terms Western Union, T/T, L/C, D/P, D/A
Supply Ability 3,000 sets/per month
Product Details
Name Oil Flooded Rotary Screw Compressor Air End Large
Driven Mode Direct Driven VSD Inverter Danfoss Danmark
Inverter Motor IE3 VSD 93.8% Super High Efficient Motor Cooling Air Flow 1080m3/min
Starting Mode Inverter Rated Power 250Kw/330Hp
Working Pressure 8-15Bar PLC Schneider
Controller Colorful Touchable Smart Control
High Light

vsd air compressor


oil injected screw compressor

Leave a Message
Product Description

Large Oil Flooded Rotary Screw Compressor / Mobile Screw Compressor


permanent magnet motor


Permanent magnet motor using high-performance NdFeB permanent magnet, 120 ℃ without losing the magnetic, life over 15 years.

Hollow coil with special frequency corona enameled wire, insulation performance, longer service life.

Can achieve soft start, run, the motor current will not exceed the full load current, at the same time, greatly reducing the impact on the grid equipment, electricity equipment will not cause damage.




1. World-leading "Made in Germany" Rotorcomp screw air end
2,25-30% energy saving than normal VSD compressor
3. wider 15-60hz adjustable-speed drive system
4. Intelligent touchable PLC control system
5. Double higher efficient VSD energy-saving motors in IE3 CE&MEPS




Shanghai rotorcomp Variable speed drive Screw Air Compressor adapting the amount of free air delivered to compressed air demand is the most economical operating method where demand for compressed air fluctuates considerably or where the stored volume is very small or where operating below peak load.

The benefits of rotorcomp VSD air screw compressor

>Smooth starts and stops within seconds
>Continuous volume flow regulation from 25-100%
>Adjustable-speed drive from 15-60hz
>minimization of wear and maintenance costs
>No power-peaks during start-up
> nearly no idling


250KW air cooling compressor parameters


LGCD-46/8 LGCD-40/10 LGCD-35/13
Discharge capacity m3/min 46 40 35
Working pressure MPa 0.8 1.0 1.3
Cooling style   Air cooling
Working style   one stage, continuous working
Driven method   Direct driven
Inlet status Temperature ≤40
Pressure MPa Atmospheric pressure
Relative humidity   ≤100%
Noise dB(A) ≤85
Oil content ppm ≤2
Drive rotor speed rpm 984-1495
Dust particle size μm 1μm
Cooler outlet temperature Ambient temperature+10
Cooling air flow m3/min 1080
Displacement control mode   Load/empty + stop for too long empty status
Safety valve set pressure MPa   0.88 1.1 1.43
Lubricating oil volume L 160
Lubricating oil brand   ROTORCOMP
Air outlet connection size   DN100
Drain connection size   G1
Dimension L mm 3800
W mm 1950
H mm 1850
Net Weight kg 5700
Motor Type   Y2355L-2
Rating rpm 1491
Power KW 250
Service coefficient   1.2
Degree of protection   IP55
Insulation class   F(B)
Startup mode   Reduced voltage
Voltage V 380
Frequency Hz 50
Rated current A 475
Weight of motor kg 1990


Advantages of our new EVO technology


1. New ROLLING PROFILE– ultimate efficiency with

reduced noise

2. Long life cycle due to increased bearing dimensions

and wear-free ROLLING PROFILE

3. Wide operating pressure range from 5 to 15 barg

Air end –

4. “Made in Germany”

5. Quality assurance – bench test of every air end

before leaving our factory

6. Easy application selection with our new


7. Highest flexibility for your package design

• Suitable for all types of drive driving motors

• Drive options: Belt drive, direct drive, internal

gear drive

• Base and face-flange mounting