Continuous Cooperation Direct Driven Air Compressor Intelligent Control System
Direct Driven Air Compressor Description:
Large displacement,stable pressure and high efficiency.
Low exhause temperature (only 7 °C~10°C higher than the ambient temperature)
Safe,liable,smooth operation,little noise and long maintenance cycle and using life.
The intelligent control system completely satisfy the continuous cooperation without man work.
Many screw air compressors operate together and start or shut down automatically
according to the air amount,and no man-work is needed.
The degree of tightness of the belt can be auto-matched with the flexible belt. Through adjusting the tensility, the loss of the pressure and efficiency can be reduced to the lowest point and increase the efficiency.
Direct Driven Air Compressor Feature
such as: 380Volt,3phase,50hz
420Volt,3phase,50hz
380Volt,3phase,60hz
220Volt,3phase and 60hz, etc.
15KW air cooling compressor parameters
ITEM | UNIT | MODEL | ||||
LGCD-15 | ||||||
Free air delivery | m3/min | 2.35 | 2.30 | 2.05 | 1.65 | |
Max. working pressure | MPa | 0.7 | 0.8 | 1.0 | 1.3 | |
Compressor type | Oil inject screw compressor | |||||
Cooling type | Air cooling | |||||
Driven type | Direct driven | |||||
Inlet status | Temperature | ℃ | ≤45 | |||
Pressure | MPa | Atmospheric pressure | ||||
Relative humidity | ≤90% | |||||
Noise Level | dB(A) | ≤70 | ||||
Residual oil content | ppm | ≤2 | ||||
Drive rotor speed | rpm | 2930 | 2930 | 2930 | 2930 | |
Compressed air outlet temperature | ℃ | Ambient temperature+10 | ||||
Cooling air flow | m3/hr | 6300 | ||||
Control mode | Intelligent controller | |||||
Safety valve set pressure | MPa | 0.77 | 0.88 | 1.10 | 1.43 | |
Lubricating oil volume | L | 10 | ||||
Lubricating oil brand | ROTORCOMP | |||||
Compressed air outlet connection | G1 | |||||
Dimension | L | mm | 1080 | |||
W | mm | 750 | ||||
H | mm | 1000 | ||||
Net Weight | kg | 360 | ||||
Motor | Model | Y2160M2-2 | ||||
Speed | rpm | 2930 | ||||
Rated Power | KW | 15 | ||||
Service factor | 1.2 | |||||
Protection type | IP23/IP54 | |||||
Insulation class | F | |||||
Startup mode | ʏ-Δ starting | |||||
Voltage | V | 380(Special on request) | ||||
Frequency | Hz | 50(Special on request) | ||||
Rated current | A | 29.4 | ||||
Weight of motor | kg | 125 |
15KW air compressor main spare parts
No. | Item | Model | Brand | |||
15KW | ||||||
0 | Max. working pressure | 0.7 | 0.8 | 1.0 | 1.3 | |
1 | Air end | 4030200013 | 4030200013 | 4030200012 | 4030200011 | ROTORCOMP (China) |
2 | Motor | 4020100032 | HEBEI/HUADA | |||
3 | Pully | 402010003 | CPT | |||
4 | Coupling | 405100001 | OPT (Germany) | |||
5 | Intake Valve | 4070101001 | HONGXING | |||
6 | Solenoid valve | 4080101002 | CKD | |||
7 | Minimum pressure valve | 4070208003 | HONGXING | |||
8 | Safety valve | 4070303001 | 4070303002 | 4070303003 | 4070303004 | YUANTIAN |
9 | Air filter | 4080111002 | ROTORCOMP | |||
10 | Air filter element | 4080119011 | ROTORCOMP | |||
11 | Oil filter | 4080203001 | ROTORCOMP | |||
12 | Oil separator element | 4080318014 | ROTORCOMP | |||
13 | Oil separator tank | 4040901001 | ROTORCOMP | |||
14 | Cooler | 4060500011 | ROTORCOMP | |||
15 | Cooling fan assembly | 4060100011 | ROTORCOMP | |||
16 | Oil level sight glass | 4120400031 | ROTORCOMP | |||
17 | Solenoid valve | 4072000031 | HONGXING | |||
18 | Controller | 4101300111 | PLOT | |||
19 | Contactor-1 | 4100900021 | SCHNEIDER (France) | |||
20 | Contactor-2 | 4100900041 | SCHNEIDER (France) | |||
21 | Contactor-3 | 4100900051 | SCHNEIDER (France) | |||
22 | Pressure sensor | 4100100011 | ROTORCOMP | |||
23 | Temperature sensor | 4100300031 | ROTORCOMP | |||
24 | Pressure gauge | 4100200011 | ROTORCOMP |
After-sale Service
• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.
• Warranty: One year for the whole machine Genuine spare parts will be provided with best price.
• Over board engineer service is available.
Special Customized Service
1) Full OEM
• Quantity: at least 5 pcs
• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.
2) Half OEM
• Quantity: no limit
• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.
3) Logo OEM
• Quantity: no limit
• Only the logo will be changed to yours, and no extra fee will be charged.
Overseas Engineer Service
• We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.
Contact Us at Any Time