-
Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
-
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
High Efficiency Heated Desiccant Air Dryer / Energy Saving Compressed Air Treatment

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xCapacity | 1.2m3/min-160m3/min | Working Pressure | 6-10Bar |
---|---|---|---|
Max.inlet. Temp. | 45℃ | Max.Ambient.Temp. | 45℃ |
Purge Air | 12-15% | Desiccant | Activated Aluminum &Molecular Siere |
Dew Point | -20- -40℃ | Inlet Oil Content | 0.01ppm |
Working Period | 4-20Mins | Power | 220-450V/50-60HZ |
High Light | heatless desiccant compressed air dryer,air treatment plant |
High efficient reliable Heated desiccant air dryer
Dew point:-20 °C - -40°C
ISO, CE certificated With world-top activated Aluminum & Molecular contents.
1.2m3/min~600m3/min customized 6-10bar pressure with less air consumption.
Features of Heatless desiccant air dryer Air Dryer:
Capacity: 1.2m3/min~160m3/min Working Pressure: ≤10bar
Max.inlet temp: 45°C
Max Ambient Temp:50°C
Min.Ambient Temp: 5°C
Refrigerant:Activated Aluminum &Molecular Siere
Dew Point: -20°C - -40°C
Key benefits of Shanghai rotorcomp desiccant air dryer
- Longer life span of your equipment and distribution network due to less wear
- Greater productivity and lower maintenance costs thanks to less breakdowns
- Multiport inlet and outlet which ensures fast and easy installation
- Higher final product quality
- Increased reliability and reduced risk for leaks
- Energy savings with lower pressure drops
- Pressure dew point sensor
Description:
Micro heat regenerative adsorption pressure desiccant dryer with no heat regeneration principle is basically the same, the difference is that it used to regenerate the low-pressure dry air before re-entering the regeneration tower after receipt of the desiccant dehumidification in the structure increased heating device, on the increase in the regeneration process receipt and cold blowing processes.
slightly hot regenerated adsorption dryer advantage of less energy waste, only 6%. Switching cycle is long and less engine wear, improved equipment reliability. It is the final product gas dryness ratio heatless with even better.
Model | Cpacity m3/min | Power Kw | Voltage V/50Hz | connection | Dimension L×W×H | Weight Kg |
HDR-10XF | 1.2 | 0.85 | 380 | ZG1″ | 800×400×1360 | 120 |
HDR-20XF | 2.4 | 1.0 | 380 | ZG1″ | 800×400×1460 | 180 |
HDR-30XF | 3.8 | 1.25 | 380 | ZG1.5″ | 1000×450×1600 | 270 |
HDR-60XF | 6.5 | 1.5 | 380 | ZG1.5″ | 1200×500×1950 | 400 |
HDR-75XF | 8.5 | 1.8 | 380 | ZG1.5″″ | 1400×600×2000 | 510 |
HDR-100XF | 10.7 | 2.5 | 380 | ZG2″ | 1400×600×2090 | 700 |
HDR-150XF | 13.5 | 2.5 | 380 | ZG2″ | 1400×600×2140 | 740 |
HDR-200XF | 18 | 3.0 | 380 | DN65 | 1400×600×2200 | 780 |
HDR-250XF | 25 | 4.0 | 380 | DN80 | 1670×650×2435 | 1180 |
HDR-300XF | 35 | 6.5 | 380 | DN100 | 1670×650×2566 | 1760 |
HDR-350XF | 45 | 8.8 | 380 | DN100 | 1750×750×2700 | 2200 |
HDR-400XF | 55 | 10.2 | 380 | DN125 | 1800×750×2755 | 2600 |
HDR-450XF | 65 | 13 | 380 | DN125 | 1900×700×3070 | 3100 |
HDR-500XF | 85 | 13 | 380 | DN150 | 2620×1120×3070 | 4100 |
HDR-550XF | 110 | 13 | 380 | DN150 | 3100×1650×3200 | 5200 |
HDR-600XF | 160 | 13 | 380 | DN200 | 3240×1770×3190 | 6000 |
1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail; |
2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail; |
3. 1 year warranty |