Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
150HP screw air compressor german rotorcomp air end in TUV certificates, 5 years warranty
|Place of Origin||Germany|
|Brand Name||Shanghai Rotorcomp|
|Model Number||LGFD screw compressor|
|Minimum Order Quantity||Min.:1set|
|Packaging Details||Exported Wooden Package|
|Delivery Time||15-20 working days|
|Payment Terms||Western Union, T/T, L/C, D/P, D/A|
|Supply Ability||3,000 sets/per month|
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Warranty||5 Years||Air End||Made In Germany|
|Advanced Design||Design In Germany||Motor||IE3 Super High Efficient Motor|
|Cooling System||Enlarged Increased 30% Performance||Intake Valve||Hoerbiger|
|Safety Valve||Yuantian||Temp. Sensor||Danmark|
rotary screw type compressor,
screw drive air compressor
150HP screw air compressor original german air end in TUV certificates, 5 years warranty
Advantages of LGFD High-end Series Screw Compressor:
1. World-leading Made in Germany Rotorcomp screw air end
2. 5 years warranty
3. Extraordinary cooling system design
4. Intelligent control system
5. higher efficient energy-saving motor in IP55 IE3 CE&MEPS, SF1.2
6. Unique driving guard system
7. ISO,TUV,GA,SGS certificates
Advantages of our new air screw compressor technology
|Strict delivery time|
|Good after-sales service|
|Profession maker for 18 years|
|Strict quality control|
|Streamline production makes each node be well controlled thus to guarantee more reliable quality.|
|Re-create the industry revolution of the air compresssor ,|
|Low after-sales maintenance cost and excellent promptness in the industry,|
|We not only provide air systems, but also break the industry monopoly to provide the users with profits|
All of our LGFD air screw compressors have special Drives and electrics system that is almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor.
All the electronic components are brand products of leading manufacturers. rives and electrics. The Air end of our LGFD rotary screw compressor-made in Germany. The centrepiece of the compressor is the air end, which is constructed and manufactured with the most modern production methods in Germany. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
We design the new Oil separation system for our LGFD air screw compressor that Compressors up to 132 kW are equipped with external separators that can be changed in a simple spin-off/spin-on process. Larger units have an internal separator cartridge. Due to the excellent separation efficiency of the system as a whole, the compressors can be used in the pressure range of 5.0 to 15.0 bar. Special pressures on request.
And the Oil circuit of our LGFD rotary screw compressor is the amount of oil in the units is determined in such a way as to extend the oil change intervals (depending on ambient conditions).An oil level sensor is integrated as standard and is read by the controller. All the units in this series have a horizontal oil separation vessel in which the oil is separated from the compressed air highly efficiently at low speeds.
110KW air cooling compressor parameters
|Free air delivery||m3/min||20.50||17.50||14.50||13.50|
|Max. working pressure||MPa||0.8||1.0||1.3||1.5|
|Compressor type||Oil inject screw compressor|
|Cooling type||Air cooling|
|Driven type||Belt driven|
|Residual oil content||ppm||≤1|
|Drive rotor speed||rpm||3200||2750||2370||2040|
|Compressed air outlet temperature||℃||Ambient temperature＋10|
|Cooling air flow||m3/hr||11200|
|Control mode||Intelligent controller|
|Safety valve set pressure||MPa||0.88||1.10||1.43||1.60|
|Lubricating oil volume||L||70|
|Lubricating oil brand||ROTORCOMP|
|Compressed air outlet connection||G2|
|Startup mode||ʏ-Δ starting|
|Voltage||V||380(Special on request)|
|Frequency||Hz||50(Special on request)|
|Weight of motor||kg||920|
|1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail;|
|2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail;|
3. Frequency converters (optional).
4. 1 years warranty, 5 years warranty for air end