Home
>
products
>
Screw Air Compressor
>
|
| Place of Origin | Germany |
| Brand Name | Shanghai Rotorcomp |
| Certification | ISO.TUV,CE,GS |
| Model Number | LGCD screw compressor |
1,Economic running costs
2,Good environmental adaptability
3,Extraordinary cooling system design
4,screw air end design by R&D center in German
5,GA,GC,ISO,ASME certificates
The almost loss-free power transmission guarantees reliable, high-performance compressor operation. The regular maintenance requirement is reduced to lubrication of the motor. All the electronic components are brand products of leading
manufacturers. rives and electrics.
The centrepiece of Direct-driven Screw compressor is the air end, which is constructed and manufactured with the most modern production methods in China. The optimal air end for your compressor can be used on a modulating basis. In frequency-controlled units, where the operating pressure changes, adjustments can also be made on the frequency controller to optimally adjust the speed of the compressor to the compressor performance.
Only electric motors from well-known manufacturers of protection class IP54/IP23 are used in our Direct-driven Screw compressor. As a standard, the drive motors are monitored both thermally (via the thermistor of the motor) as well as electronically(overload protection via the frequency inverter).
250KW air cooling compressor parameters
| ITEM | UNIT | MODEL | ||||
| LGCD-46/8 | LGCD-40/10 | LGCD-35/13 | ||||
| Discharge capacity | m3/min | 46 | 40 | 35 | ||
| Working pressure | MPa | 0.8 | 1.0 | 1.3 | ||
| Cooling style | Air cooling | |||||
| Working style | one stage, continuous working | |||||
| Driven method | Direct driven | |||||
| Inlet status | Temperature | ℃ | ≤40 | |||
| Pressure | MPa | Atmospheric pressure | ||||
| Relative humidity | ≤100% | |||||
| Noise | dB(A) | ≤85 | ||||
| Oil content | ppm | ≤2 | ||||
| Drive rotor speed | rpm | 1491 | ||||
| Dust particle size | μm | 1μm | ||||
| Cooler outlet temperature | ℃ | Ambient temperature＋10 | ||||
| Cooling air flow | m3/min | 1080 | ||||
| Displacement control mode | Load/empty + stop for too long empty status | |||||
| Safety valve set pressure | MPa | 0.88 | 1.1 | 1.43 | ||
| Lubricating oil volume | L | 160 | ||||
| Lubricating oil brand | ROTORCOMP | |||||
| Air outlet connection size | DN100 | |||||
| Drain connection size | G1 | |||||
| Dimension | L | mm | 3000 | |||
| W | mm | 1950 | ||||
| H | mm | 1850 | ||||
| Net Weight | kg | 5700 | ||||
| Motor | Type | Y2355M-2 | ||||
| Rating | rpm | 1491 | ||||
| Power | KW | 200 | ||||
| Service coefficient | 1.2 | |||||
| Degree of protection | IP55 | |||||
| Insulation class | F(B) | |||||
| Startup mode | Reduced voltage | |||||
| Voltage | V | 380 | ||||
| Frequency | Hz | 50 | ||||
| Rated current | A | 440 | ||||
| Weight of motor | kg | 1690 | ||||
Contact Us at Any Time
