-
Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
-
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
Rotorcomp Heatless Regenerative Desiccant Dryers Activated Aluminum PLC Control

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xCapacity | 10.7m3/min | Working Pressure | 6-10Bar |
---|---|---|---|
Max.inlet. Temp. | 45℃ | Max.Ambient.Temp. | 45℃ |
Purge Air | 4-6% | Desiccant | Activated Aluminum &Molecular Siere |
Dew Point | -40- -70℃ | Inlet Oil Content | 0.01ppm |
Working Period | 4-20Mins | Power | 220-450V/50-60HZ |
Dimension | 1400*600*2090mm | Weight | 700Kg |
High Light | heated desiccant air dryer,air treatment plant |
Heatless Desiccant Absorption Compressed Air Dryer with PLC for air compressor -40--70℃ zero air consumption
Dew point: -40 °C - -70°C
ISO, CE certificated With world-top activated Aluminum & Molecular contents.
10.7m3/min customized 6-10bar pressure with less air consumption.
Features of Regenerated adsorption desiccant air dryer for air compressor :
Capacity: 10.7m3/min Working Pressure: ≤10bar
Max.inlet temp: 45°C
Max Ambient Temp:50°C
Min.Ambient Temp: 5°C
Refrigerant:Activated Aluminum &Molecular Siere
Dew Point: -40°C - -70°C
Time Proven Design:
*Rust Prevention: have been treated against corrosion, it does not need to be treated against corrosion and dust again within 10 years on the promise that normal maintenance is ensured.
*Various Valves provides reliable and long service life.
*Vessels have a large filling level of desiccant bed that allows compressed air has enough time to contact with desiccant. That is, more efficient on drying process in the Adsorption Dryer.
*Generously sized silencers ensure efficient noise reduction for the escaping regeneration air.
Ease of Monitoring:
*PLC Control Panel
*Electronic(Automatic)Drain Valve.
Safety Protection Systems for overheat and Systems Alarm and Stop for Errors and Overworking. Expand Machine Life.
*Each valve is controlled individually with a time-delay, which results in overlap-free switch-over without pressure peaks between adsorption and regeneration.
Minimum purge air use, less than 12%,the lowest in the industry
A . excellent designing tower ,save 95% of the heat of adsorption ,stored heat maintains purge maintains purge air temperature during regeneration.
Maximzing the purge air’s ability to carry off moisture ,minimizing the amount of purge air required.
B . drying and purging in counter flow arrangement, energy not wasted when wet air travels through dry desiccant.
C . ability to match purge air travels through dry desiccant.
Long desiccant life
A . suitable tower sized make the air velocity through the bed won’t fluidize desiccant,making good use of the desiccant.
B . rationalizing system ,remove oil and heavy contaminants before flow into the tower ,protects bed from contamination .using butterfly valve and reliable program controller which can be auto timing and auto switching, works stable and reliable ,unacted on electric net , pressure and electric field .
scientifically designed switch time ensuring the air pressure being stable and reliable , unactd on electric net, pressure and electric field, scientifically designed switch time ensuring the air pressure being stable ,running without waving. Non basement, easy to install.
Model | Cpacity m3/min |
Power Kw | Voltage V/50Hz |
connection | Dimension L×W×H |
Weight Kg |
HDR-100XF | 10.7 | 2.0 | 380 | G2 | 1400×600×2090 | 700 |
1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail; |
2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail; |
3. 1 year warranty |