Heatless regenerative desiccant adsorption air dryer dew point -20--40℃ less air consumption
Dew point:-20 °C - -40°C
ISO, CE certificated With world-top activated Aluminum & Molecular contents.
1.2m3/min~600m3/min customized 6-10bar pressure with less air consumption.
Features of Heatless desiccant air dryer Air Dryer:
Capacity: 1.2m3/min~160m3/min Working Pressure: ≤10bar
Max.inlet temp: 45°C
Max Ambient Temp:50°C
Min.Ambient Temp: 5°C
Refrigerant:Activated Aluminum &Molecular Siere
Dew Point: -20°C - -40°C
Key benefits of Shanghai rotorcomp desiccant air dryer
- Longer life span of your equipment and distribution network due to less wear
- Greater productivity and lower maintenance costs thanks to less breakdowns
- Multiport inlet and outlet which ensures fast and easy installation
- Higher final product quality
- Increased reliability and reduced risk for leaks
- Energy savings with lower pressure drops
- Pressure dew point sensor
Shanghai Rotorcomp Heatless Desiccant Air Dryers provide constant -40 °C pressure dewpoint.These dryers are designed to supply clean and very dry compressed air for critical applications.Pre-filters and after filters are supplied together with Özen Heatless Desiccant Air Dryers to keep the air stream clean and maintain the integrity of the desiccant medium. The so special valves and desiccant provide lowest pressure drop.
Thet win towers at HDR Desiccant dryers with high-strength structure and absorbent desiccant provides continuous cooling.
While compressed air drying by leaving moisture at first desiccant bed, the second desiccant bed simultaneously regenerated with service air to be ready for drying process.
Regeneration of desiccant at HDR Desiccant Dryers accomplished without use of heat. The wet desiccant bed dried by diverting a small amount of the dry air from the out which is close to atmospheric pressure. The purge flow rate is adjustable to match required dew-point as per outside conditions. The super dry air flows in a counter direction through the wet bed, sweeps all water vapour which absorbed by the desiccant.
|1. The above parameters and color are designed according to customer needs, the parameters are for reference only, the final parameters of the drawings shall prevail;|
|2. According to user requirements and needs, to join way: air/water cooling, oil content, weight, appearance size according to the need to design, to the final order and the technical agreement shall prevail;|
|3. 1 year warranty|