Home
>
Products
>
Screw Air Compressor
>
|
|
| Place of Origin | CHINA |
| Brand Name | shanghai rotorcomp |
| Certification | ISO,CE,TUV, |
| Model Number | LGCD-5.5D C |
Belt Driven | Air Cooling | Intelligent Controller
The ROTORCOMP LGCD-5.5D C Series is a 5.5kW oil-injected screw air compressor developed for general industrial compressed air requirements. The machine incorporates belt-driven transmission, air cooling and an intelligent control system within a compact enclosed structure.
The compressor is available in four working pressure configurations: 0.7, 0.8, 1.0 and 1.3 MPa. Air delivery is matched to each pressure configuration according to the technical data listed below.
| Item | Specification |
|---|---|
| Product Series | LGCD-5.5D C |
| Rated Power | 5.5 kW |
| Compressor Type | Oil Inject Screw Compressor |
| Cooling Type | Air Cooling |
| Driven Type | Belt Driven |
| Control Mode | Intelligent Controller |
| Motor Efficiency | IE3 |
| Motor Protection | IP55 |
The following operating values correspond to the maximum working pressure selected for the LGCD-5.5 compressor.
| Parameter | 0.7 MPa | 0.8 MPa | 1.0 MPa | 1.3 MPa |
|---|---|---|---|---|
| Free Air Delivery (m³/min) | 0.92 | 0.87 | 0.75 | 0.61 |
| Drive Rotor Speed (rpm) | 3500 | 2950 | 2450 | 2050 |
| Safety Valve Set Pressure (MPa) | 0.77 | 0.88 | 1.10 | 1.43 |
Technical reference model: LGCD-5.5.
The compressor contains an electric motor, screw compression assembly, cooling components and associated piping. Its mechanical layout supports inspection of major components during routine servicing.
The specified drive arrangement is belt driven. The air-cooling system is designed for a cooling airflow of 4800 m³/hr.
The oil-injected screw compression system incorporates lubrication and oil-related components within the compressor assembly. The technical specification lists a lubricating oil capacity of 10 L.
ROTORCOMP lubricating oil is specified for this model. Residual oil content is listed as no more than 2 ppm, while compressed air outlet temperature is specified as ambient temperature plus 10°C.
The LGCD-5.5 is specified with an intelligent controller. The exterior control interface includes a display and emergency stop control.
The motor technical data specifies direct starting, IE3 efficiency and IP55 protection. Standard voltage and frequency are listed as 380 V and 50 Hz, with special requirements available on request.
The following data is based on the supplied 5.5kW air cooling compressor parameter sheet.
| Technical Item | Unit | LGCD-5.5 |
|---|---|---|
| Inlet Temperature | °C | ≤45 |
| Inlet Pressure | MPa | Atmospheric Pressure |
| Relative Humidity | % | ≤90 |
| Noise Level | dB(A) | ≤70 |
| Residual Oil Content | ppm | ≤2 |
| Air Outlet Temperature | °C | Ambient Temperature +10 |
| Cooling Air Flow | m³/hr | 4800 |
| Control Mode | — | Intelligent Controller |
| Lubricating Oil Volume | L | 10 |
| Lubricating Oil Brand | — | ROTORCOMP |
| Air Outlet Connection | — | G3/4 |
| Length | mm | 850 |
| Width | mm | 700 |
| Height | mm | 1020 |
| Net Weight | kg | 170 |
| Motor Parameter | Specification |
|---|---|
| Motor Model | Y2132S1-2 |
| Rated Power | 5.5 kW |
| Speed | 2900 rpm |
| Service Factor | 1.2 |
| Protection Type | IP55 |
| Efficiency | IE3 |
| Startup Mode | Direct Starting |
| Voltage | 380 V (Special on request) |
| Frequency | 50 Hz (Special on request) |
| Rated Current | 10.5 A |
| Weight of Motor | 65 kg |
The LGCD-5.5D C Series can be considered for general workshop equipment, pneumatic tools, assembly operations, light manufacturing and other industrial compressed air applications.
Final equipment selection should be based on the required working pressure, air consumption, electrical supply and air quality requirements.
When requesting a quotation, please specify the required pressure configuration, expected air consumption, local voltage and frequency, and installation conditions.
Product: LGCD-5.5D C Series
Manufacturer: Shanghai Rotorcomp Screw Compressor Co., Ltd.
Website: www.rotorcomp-compressor.com
Technical specifications are subject to confirmation according to the selected equipment configuration.
Contact Us at Any Time