Home
>
Products
>
Screw Air Compressor
>
|
|
| Place of Origin | CHINA |
| Brand Name | Shanghai Rotorcomp |
| Certification | ISO,CE,TUV, |
| Model Number | LGCD(C)-7.5 D B VP |
The LGCD(C)-7.5 D B VP Series belongs to the Shanghai Rotorcomp industrial screw compressor product range. It is designed for applications requiring a controlled compressed air supply within a compact cabinet-type equipment arrangement.
The supplied LGCD-7.5 reference specification covers a 7.5 kW oil-injected screw compressor with four maximum working pressure options. Its operating capacity depends on the selected pressure configuration.
The reference technical data provides four pressure and delivery combinations. The air requirement of the intended application should be evaluated against the corresponding operating point.
| Parameter | Option A | Option B | Option C | Option D |
|---|---|---|---|---|
| Working Pressure (MPa) | 0.7 | 0.8 | 1.0 | 1.3 |
| Free Air Delivery (m³/min) | 1.20 | 1.15 | 1.00 | 0.75 |
| Drive Rotor Speed (rpm) | 3800 | 3500 | 2950 | 2450 |
| Safety Valve Setting (MPa) | 0.77 | 0.88 | 1.10 | 1.43 |
All values are taken from the supplied LGCD-7.5 technical reference sheet.
The compressor uses an oil-injected rotary screw compression arrangement. The internal assembly consists of the drive system, compression components, air intake elements and associated oil piping.
The enclosed equipment arrangement permits access to major mechanical components for inspection and scheduled service. The technical reference specifies belt-driven transmission, subject to confirmation against the ordered VP configuration.
The reference LGCD-7.5 configuration is air cooled. Its specified cooling air flow is 4800 m³/hr. The cooling system and cabinet ventilation must be considered when planning equipment location and service access.
The technical schedule specifies a compressed air outlet temperature of ambient temperature plus 10°C and a noise level not exceeding 70 dB(A).
An intelligent controller is listed in the LGCD-7.5 reference specification. Electrical equipment and starting arrangements must be matched to the actual compressor configuration supplied.
The motor reference data specifies 380V, 50Hz, IE3 efficiency and IP55 protection. Alternative voltage and frequency arrangements are listed as available on request.
Reference specification: 7.5 kW air cooling compressor, model LGCD-7.5.
| Item | Unit | Specification |
|---|---|---|
| Model | — | LGCD-7.5 |
| Compressor Type | — | Oil Inject Screw Compressor |
| Cooling Type | — | Air Cooling |
| Driven Type | — | Belt Driven |
| Inlet Temperature | °C | ≤45 |
| Inlet Pressure | MPa | Atmospheric Pressure |
| Relative Humidity | % | ≤90 |
| Noise Level | dB(A) | ≤70 |
| Residual Oil Content | ppm | ≤2 |
| Compressed Air Outlet Temperature | °C | Ambient Temperature +10 |
| Cooling Air Flow | m³/hr | 4800 |
| Control Mode | — | Intelligent Controller |
| Lubricating Oil Volume | L | 10 |
| Lubricating Oil Brand | — | ROTORCOMP |
| Air Outlet Connection | — | G3/4 |
| Length | mm | 850 |
| Width | mm | 700 |
| Height | mm | 1020 |
| Net Weight | kg | 190 |
| Motor Parameter | Technical Value |
|---|---|
| Model | Y2132S2-2 |
| Speed | 2900 rpm |
| Rated Power | 7.5 kW |
| Service Factor | 1.2 |
| Protection Type | IP55 |
| Efficiency | IE3 |
| Startup Mode | Direct Starting |
| Voltage | 380V (Special on request) |
| Frequency | 50Hz (Special on request) |
| Rated Current | 14.2 A |
| Motor Weight | 72 kg |
Selection of a suitable compressor configuration should begin with the pressure and air delivery requirements of the compressed air system. The four specified LGCD-7.5 operating points should be compared with the intended load.
Other considerations include the electrical supply, inlet conditions, cooling ventilation, available installation space and required downstream air treatment.
This product may be considered for general industrial pneumatic equipment, workshop operations and manufacturing processes, provided the selected pressure, flow and air quality are appropriate for the application.
Please provide the following project information when requesting technical confirmation or a quotation:
Shanghai Rotorcomp Screw Compressor Co., Ltd.
Product: LGCD(C)-7.5 D B VP Series
Website: www.rotorcomp-compressor.com
Email: sales@rotorcomp-compressor.com
Reference technical data is based on the supplied LGCD-7.5 specification. Final configuration should be confirmed before ordering.
Contact Us at Any Time