Home
>
Products
>
Screw Air Compressor
>
|
|
| Place of Origin | CHINA |
| Brand Name | Shanghai Rotorcomp |
| Certification | ISO,CE,TUV, |
| Model Number | LGCD-11D B VP |
The ROTORCOMP LGCD-11D B VP is an enclosed industrial oil-injected screw air compressor configured for compressed air production and equipment operation.
The LGCD-11 reference design incorporates a direct-drive compression arrangement, air cooling and intelligent control. The cabinet provides access to major mechanical and electrical components.
Four maximum working pressure configurations are specified, allowing the required air delivery to be evaluated against the application.
The mechanical assembly includes the electric motor, screw compression unit and associated connections. The reference configuration specifies a direct-driven transmission arrangement.
The service compartment provides access for inspection of the motor, drive connection, compressor housing and associated piping.
The LGCD-11 reference technical schedule specifies four maximum working pressure options. Each pressure corresponds to a different free air delivery value.
| Parameter | 0.7 MPa | 0.8 MPa | 1.0 MPa | 1.3 MPa |
|---|---|---|---|---|
| Free Air Delivery (m³/min) | 1.70 | 1.65 | 1.50 | 1.15 |
| Drive Rotor Speed (rpm) | 2930 | 2930 | 2930 | 2930 |
| Safety Valve Setting (MPa) | 0.77 | 0.88 | 1.10 | 1.43 |
The LGCD-11 reference specification identifies an air-cooled system with cooling air flow of 5380 m³/hr.
Proper ventilation is required around the compressor enclosure. Cooling components and air passages should be checked during routine service inspections.
The compressor includes an electronic operator interface and an internal electrical equipment compartment. The reference specification lists an intelligent controller.
The selected equipment photograph shows the electrical control arrangement. Motor starting method and power supply should be confirmed against the individual machine configuration.
The oil-injected screw compressor uses a lubrication system with associated oil-separation components. The LGCD-11 reference specification lists a lubricating oil volume of 10 L.
ROTORCOMP is specified as the lubricating oil brand, with residual oil content no greater than 2 ppm. Maintenance procedures should follow the relevant compressor service documentation.
Technical reference model: LGCD-11. Values below are reproduced from the supplied 11 kW air cooling compressor parameter sheet.
| Item | Unit | Value |
|---|---|---|
| Model | — | LGCD-11 |
| Compressor Type | — | Oil Inject Screw Compressor |
| Cooling Type | — | Air Cooling |
| Driven Type | — | Direct Driven |
| Inlet Temperature | °C | ≤45 |
| Inlet Pressure | MPa | Atmospheric Pressure |
| Relative Humidity | % | ≤90 |
| Noise Level | dB(A) | ≤70 |
| Residual Oil Content | ppm | ≤2 |
| Drive Rotor Speed | rpm | 2930 |
| Compressed Air Outlet Temperature | °C | Ambient Temperature +10 |
| Cooling Air Flow | m³/hr | 5380 |
| Control Mode | — | Intelligent Controller |
| Lubricating Oil Volume | L | 10 |
| Lubricating Oil Brand | — | ROTORCOMP |
| Air Outlet Connection | — | G1 |
| Length | mm | 1080 |
| Width | mm | 750 |
| Height | mm | 1150 |
| Net Weight | kg | 350 |
| Motor Parameter | Specification |
|---|---|
| Motor Model | Y2160M1-2 |
| Speed | 2930 rpm |
| Rated Power | 11 kW |
| Service Factor | 1.2 |
| Protection Type | IP55 |
| Efficiency | IE3 |
| Startup Mode | Y-Delta Starting |
| Voltage | 380V (Special on request) |
| Frequency | 50Hz (Special on request) |
| Rated Current | 21.8 A |
| Motor Weight | 115 kg |
Compressor selection should be based on working pressure, free air delivery, electrical supply and installation conditions.
The equipment configuration should also consider cooling ventilation, maintenance access and downstream compressed air treatment requirements.
Contact Us at Any Time