Home
>
Products
>
Screw Air Compressor
>
|
|
| Place of Origin | CHINA |
| Brand Name | shanghai rotorcomp |
| Certification | ISO,CE,TUV, |
| Model Number | LGCD-15D B |
The ROTORCOMP LGCD-15D B VP Series is an enclosed industrial air compressor package featuring a direct-coupled mechanical arrangement, air cooling, and an intelligent control interface. The LGCD-15 reference technical schedule specifies four pressure and delivery configurations.
Rated Power
15 kW
Reference Pressure Options
0.7 / 0.8 / 1.0 / 1.3 MPa
Free Air Delivery
1.65–2.35 m³/min
The steel cabinet has removable panels for access to the compressor assembly and electrical equipment. The rear and side panels provide ventilation openings and service access features.
Air cooling is specified for the LGCD-15 reference design, with a cooling air flow of 6300 m³/hr. Adequate free space around ventilation openings is required during installation, and the cooling fan and airflow passages should be inspected during scheduled maintenance.
The reference model uses direct-driven transmission. The photographed motor and screw compression assembly are positioned inside the cabinet for inspection of major mechanical components, fasteners, and piping connections.
The oil-injected compression package contains the lubrication circuit, air intake/filter components, and an oil-separation vessel. The reference table lists a 10 L lubricating oil volume, ROTORCOMP lubricating oil, and residual oil content of no more than 2 ppm.
An electronic control interface and internal electrical equipment compartment support compressor operation. The photograph shows a particular electrical-control configuration; final motor, drive, and supply arrangements should be confirmed for the unit ordered.
Reference data are grouped by working pressure, so each flow value is matched with its corresponding pressure rather than presented as a single operating point.
| Maximum Working Pressure | 0.7 MPa | 0.8 MPa | 1.0 MPa | 1.3 MPa |
|---|---|---|---|---|
| Free Air Delivery (m³/min) | 2.35 | 2.30 | 2.05 | 1.65 |
| Safety Valve Set Pressure (MPa) | 0.77 | 0.88 | 1.10 | 1.43 |
All technical values below follow the supplied 15 kW air-cooling compressor schedule. The schedule model is shown as LGCD-15 (changed from AGCD-15); numerical values are unchanged.
| Parameter | Unit | Reference Value |
|---|---|---|
| Compressor Model | — | LGCD-15 |
| Compressor Type | — | Oil Inject Screw Compressor |
| Cooling Type | — | Air Cooling |
| Driven Type | — | Direct Driven |
| Inlet Temperature | °C | ≤45 |
| Inlet Pressure | MPa | Atmospheric Pressure |
| Relative Humidity | % | ≤90 |
| Noise Level | dB(A) | ≤70 |
| Residual Oil Content | ppm | ≤2 |
| Drive Rotor Speed | rpm | 2930 |
| Compressed Air Outlet Temperature | °C | Ambient Temperature +10 |
| Cooling Air Flow | m³/hr | 6300 |
| Control Mode | — | Intelligent Controller |
| Lubricating Oil Volume | L | 10 |
| Lubricating Oil Brand | — | ROTORCOMP |
| Compressed Air Outlet Connection | — | G1 |
| Length | mm | 1080 |
| Width | mm | 750 |
| Height | mm | 1150 |
| Net Weight | kg | 370 |
| Motor Parameter | Reference Specification |
|---|---|
| Model | Y2160M2-2 |
| Speed | 2930 rpm |
| Rated Power | 15 kW |
| Service Factor | 1.2 |
| Protection Type | IP55 |
| Efficiency | IE3 |
| Startup Mode | Y-Delta Starting |
| Voltage | 380V (Special on request) |
| Frequency | 50Hz (Special on request) |
| Rated Current | 29.4 A |
| Weight of Motor | 125 kg |
Configuration note: Actual motor and electrical data must be checked against the nameplate of the machine supplied. The motor nameplate photograph in this image set indicates a different electrical configuration from the reference motor schedule above.
For equipment selection or a quotation, please specify the following details:
Shanghai Rotorcomp Screw Compressor Co., Ltd.
Model: LGCD-15D B VP Series
Website: www.rotorcomp-compressor.com
Reference specifications should be confirmed against the ordered machine configuration. Product photographs are illustrative of the selected equipment and may show configuration differences.
Contact Us at Any Time