Home
>
Products
>
Screw Air Compressor
>
|
|
| Place of Origin | CHINA |
| Brand Name | shanghai rotorcomp |
| Certification | ISO,CE,TUV, |
| Model Number | LGCD-18.5D B |
18.5 kW Air-Cooled Oil-Injected Screw Air Compressor — Direct Driven with Intelligent Controller
Rated Power
18.5 kW
Pressure Range
0.7–1.3 MPa
Air Delivery
2.1–3.10 m³/min
Drive Type
Direct Driven
The ROTORCOMP LGCD-18.5D B Series is an industrial oil-injected rotary screw compressor housed in an enclosed cabinet. According to the LGCD-18.5 technical schedule, the unit uses direct drive, air cooling, and an intelligent controller.
The exterior cabinet incorporates an operator interface and ventilation panels. The enclosed arrangement provides access to the major compressor assemblies during inspection and scheduled servicing.
The motor and air-end are arranged in the service compartment. The supplied specification identifies a direct-driven mechanical connection and a drive rotor speed of 2930 rpm.
The detailed equipment photo provides a view of the motor housing, coupling area, and compressor inlet assembly. Installation and mechanical servicing should follow the applicable equipment manual.
The oil-injected compression system includes an oil separator vessel, piping, pressure instrumentation, and service points. The specification lists a 15 L lubricating oil volume and a residual oil content of no more than 2 ppm.
Routine inspection should include the oil level indicator, piping connections, and operating pressure instrumentation in accordance with the maintenance instructions.
The compressor is specified with an intelligent controller. The electrical compartment photo shows the terminal connections, protection components, and switching devices used in the supplied cabinet.
The reference schedule lists 380 V and 50 Hz, with special electrical configurations available on request. Confirm the exact motor and starting configuration before ordering or connecting power.
Free air delivery changes with the selected maximum operating pressure. The following values are reproduced from the supplied 18.5 kW compressor parameter table.
| Operating Data | Option A | Option B | Option C | Option D |
|---|---|---|---|---|
| Max. Working Pressure (MPa) | 0.7 | 0.8 | 1.0 | 1.3 |
| Free Air Delivery (m³/min) | 3.10 | 3.00 | 2.60 | 2.1 |
| Safety Valve Set Pressure (MPa) | 0.77 | 0.88 | 1.10 | 1.43 |
| Item | Specification |
|---|---|
| Reference Model | LGCD-18.5 |
| Compressor Type | Oil-injected screw compressor |
| Cooling Type | Air cooling |
| Driven Type | Direct driven |
| Inlet Temperature | ≤45°C |
| Inlet Pressure | Atmospheric pressure |
| Inlet Relative Humidity | ≤90% |
| Noise Level | ≤72 dB(A) |
| Residual Oil Content | ≤2 ppm |
| Drive Rotor Speed | 2930 rpm |
| Compressed Air Outlet Temperature | Ambient temperature +10°C |
| Cooling Air Flow | 7200 m³/hr |
| Control Mode | Intelligent controller |
| Lubricating Oil Volume | 15 L |
| Lubricating Oil Brand | ROTORCOMP |
| Compressed Air Outlet Connection | G1 |
| Dimensions (L × W × H) | 1300 × 850 × 1260 mm |
| Net Weight | 405 kg |
| Item | Specification |
|---|---|
| Motor Model | Y2160L-2 |
| Speed | 2930 rpm |
| Rated Power | 18.5 kW |
| Service Factor | 1.2 |
| Efficiency | IP55 |
| Insulation Class | F |
| Startup Mode | Y-Δ starting |
| Voltage | 380 V (Special on request) |
| Frequency | 50 Hz (Special on request) |
| Rated Current | 35.5 A |
| Motor Weight | 145 kg |
For equipment selection, specify the required working pressure, free air delivery, operating hours, site conditions, and electrical supply. Allow adequate ventilation and service access around the enclosure.
Specifications shown are based on the supplied LGCD-18.5 reference technical schedule. Actual delivery configuration and special electrical requests are subject to final confirmation.
Shanghai Rotorcomp Screw Compressor Co., Ltd.
Model: LGCD-18.5D B Series
Website: www.rotorcomp-compressor.com
Contact Us at Any Time