Mr.Kerry Robinson from Australiatoday I ran the compressor and I am very happy with the workmanship and the quality , it is connected to a nitrogen generator that requires around 0.8 MPA feed air from the 30 kw compressor we are commissioning it I have found that it loads and unloads from 25.5 kw - 30 kw this will be a huge saving on power consumption.
Pedro Antonio from USAWe've been used Shanghai Rotorcomp compressors over 18 sets from 10hp to 160HP installed with Oxygen generator since 2008. Most of compressors still in good working conditions without much maintenance.
415V SS Oil Free Oxygen Compressor 400rpm Four Stage Compression
|Warranty||15 Months After Delivery||After-sales Service Provided||Engineers Available To Service Machinery Overseas|
|Configuration||Stationary,Portable,Portable/Stationary||Power Source||AC Power|
|Certification||ISO,ISO9001,ISO9001 CE||Color||Customized Color|
|Product Name||Oxygen Cylinder Filling Compressor,oil Free Air Compressor||Pressure||4 Stage|
|Cooling Method||Air Cooling,Water Cooling||Application||Medical,Cylinder Filling|
|Noise Level||52 DB||Motor Power||7.5-200KW|
415V Oil Free Oxygen Compressor,
SS Oil Free Oxygen Compressor,
Oil Free Oxygen Compressor 400rpm
Shanghai Rotorcomp supplying oxygen compressor is completely oil-free and does not use any lubricating oil.
The cylinder uses stainless steel and the piston ring is self-lubricating. All these ensure the cleanliness and pollution-free of oxygen.
The working speed of the compressor is very slow, usually 200-400 rpm, suitable for continuous working conditions for 24 hours.
Generally, according to the customer’s oxygen usage, our oxygen compressors have one-stage compression, two-stage compression, three-stage compression, four-stage compression, and five-stage compression in the form of cylinders, which are single-cylinder,
Thanks to their oil-free, dry-running and gas-tight design, Shanghai rotorcomp compressors are ideally suited for use in the compression of oxygen.
- no gas contamination due to oil-free and dry-running compression
- Safe operation through the use of special, oxygen-compatible materials
- technically tight gas compressors during operation and at standstill
- Completely oil-free and dry-running piston compressor
- Gas-tight design with integrated motor
- Environmentally friendly because it is oil-free, gas-tight and efficient
- Compressor leak rate < 0.0001 mbar l/s
- Motor powers from 3 to 44 kW
- Rotary speed range 200 to 1700 1/min
- Suction pressure max. 40 bar(abs)
- Final discharge pressure max. 200 bar(abs)
- Modular cylinder configuration with cylinder diameter up to 75 mm
- Version with 1 cylinder for 1-stage compression
- Maximum flow rate at atmospheric suction pressure approx. 150 Nm3/h
- Booster-version flow rate max. approx. 50 Nm3/h
- OEM block version available without pipework and instrumentation for integration in an OEM system
- Very robust and long-lasting construction
- Compact and foundation-free installation
- Very quiet and hence suitable for installation directly at the workplace
|High Pressure oxygen compressor 150bar|